欧美人妻一区二区三区,亚洲精品无码一区二区三区网雨 ,国产精品秘入口18禁麻豆免会员,精品无人乱码一区二区三区

PA6 ST7301 NC010美國杜邦Zytel**韌熱穩定潤滑尼龍6樹脂（18024445500）

General information Value Unit Test Standard
Resin Identification PA6-HI - -
Part Marking Code >PA6-HI< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 150 / * cm³/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 1.0 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.0 / * % ISO 294-4, 2577
Postmoulding shrinkage, normal, 48h at 80°C 0.1 / * % ISO 294-4
Postmoulding shrinkage, parallel, 48h at 80°C 0.1 / * % ISO 294-4
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 1800 / 550 MPa ISO 527-1/-2
Yield stress 48 / 29 MPa ISO 527-1/-2
Yield strain 4 / 30 % ISO 527-1/-2
Nominal strain at break >50 / >50 % ISO 527-1/-2
Flexural Modulus 1700 / 550 MPa ISO 178
Flexural Stress at 3.5% 53 / 32 MPa ISO 178
Tensile creep modulus, 1000h * / 320 MPa ISO 899-1
Charpy impact strength 　 　 ISO 179/1eU
23°C N / N kJ/m² 　
-30°C N / N kJ/m² 　
Charpy notched impact strength 　 　 ISO 179/1eA
23°C 80 / 120 kJ/m² 　
-30°C 17 / 18 kJ/m² 　
-40°C 18 / 17 kJ/m² 　
Izod notched impact strength 　 　 ISO 180/1A
23°C 59 / 95 kJ/m² 　
-30°C 14 / 15 kJ/m² 　
-40°C 15 / 13 kJ/m² 　
Ball indentation hardness, H 358/30 95 /- MPa ISO 2039-1