欧美人妻一区二区三区,亚洲精品无码一区二区三区网雨 ,国产精品秘入口18禁麻豆免会员,精品无人乱码一区二区三区

PA6 ECO BKV 20 FN20 000000德國(guó)朗盛Durethan 20%玻璃無(wú)鹵阻燃尼龍6塑料（18024445500）

PA 6, 20 % glass, injection molding, halogen free flame retardant, contains at least 15 % pre-consumer-recyclate



ISO Shortname: ISO 1874-PA 6, GFHR, 12-050, G20; ISO 1043-PA G FR (30)

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 260 °C / MT 80 °C; 600 bar % ISO 294-4 0.8　
C Molding shrinkage, transverse 60x60x2; 260 °C / MT 80 °C; 600 bar % ISO 294-4 0.8　
Post- shrinkage, parallel 60x60x2; 120 °C; 4 h % ISO 294-4 0.2　
Post- shrinkage, transverse 60x60x2; 120 °C; 4 h % ISO 294-4 0.2　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 5400 2300
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 76 40
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3.0 27
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 35 75
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA <10 <10
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA <10 <10
Izod impact strength 23 °C kJ/m² ISO 180-1U 30 65
Izod notched impact strength 23 °C kJ/m² ISO 180-1A <10 <10
Izod notched impact strength -30 °C kJ/m² ISO 180-1A <10 <10
Flexural modulus 2 mm/min MPa ISO 178-A 5300 2300
Flexural strength 2 mm/min MPa ISO 178-A 140 62
Flexural strain at flexural strength 2 mm/min % ISO 178-A 3.8 7.0
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 135 50