欧美人妻一区二区三区,亚洲精品无码一区二区三区网雨 ,国产精品秘入口18禁麻豆免会员,精品无人乱码一区二区三区

PA6 BKV 130 H3.0 DUS008 000000德國朗盛Durethan 30%玻纖增強耐熱耐沖擊尼龍6塑料（18024445500）

PA 6, 30 % glass fibers, injection molding, improved impact strength, heat-aging stabilized



ISO Shortname: PA6-HI, GHR, 14-090, GF30　

Property Test Condition Unit Standard guide value
d.a.m. cond.

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 9000 5200
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 160 100
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 4 7
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 95 110
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU 80 80
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA 18 28
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA 10 10
Flexural modulus 2 mm/min MPa ISO 178-A 8000 4800
Flexural strength 2 mm/min MPa ISO 178-A 250 145
Flexural strain at flexural strength 2 mm/min % ISO 178-A 5 7
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 230 115

Thermal properties
C Melting temperature 10 °C/min °C ISO 11357-1,-3 222　
C Temperature of deflection under load 1.80 MPa °C ISO 75-1,-2 205　
C Temperature of deflection under load 0.45 MPa °C ISO 75-1,-2 220　

Other properties (23 °C)
C Density　kg/m³ ISO 1183 1365　

Processing conditions for test specimens
C Injection molding-Melt temperature　°C ISO 294 280　
C Injection molding-Mold temperature　°C ISO 294 80